Buchanan's aftermarket Spoke Kits for NORTON motorcycle hubs
Motorcycle brand names are provided for reference only. Products appearing on this site are not licensed or endorsed by listed motorcycle manufacturers. Part numbers end in the spoke and nipple material listed below.
SPOKE and NIPPLE MATERIAL
RIM TYPE
SS = STAINLESS SPOKES with STAINLESS NIPPLES
SHALLOW DROP CENTER
SZ = STAINLESS SPOKES with NICKEL PLATED STEEL NIPPLES
DP D/C = DEEP DROP CENTER
SH = STAINLESS SPOKES with BLUE ZINC PLATED STEEL NIPPLES
AFTMKT = AFTERMARKET RIM
SA = STAINLESS SPOKES with ALUMINUM NIPPLES
C = CHROME PLATED STEEL SPOKES with CHROME PLATED STEEL NIPPLES
IF YOUR KIT'S NOT HERE . . . WE CAN MAKE IT.
Spoke kits for ATLAS and EARLY COMMANDO FRONT or REAR DRUM hubs - 40 count
- SEE SIZES BELOW -
Although the hubs do not interchange front to rear, the rims and spoke kits do. Hub measures 9" diameter and 2 1/4" wide. Stock spokes were 8-10 ga. with either .250" or .300" dia. nipples.
Spoke kits for 1973 and later COMMANDO FRONT DISC hubs - 40 count
8 GAUGE SPOKES with .281" DIAMETER NIPPLES
Polished cast aluminum spool hub measures 4" diameter and 3" wide. Rims must be drilled specifically to fit this hub due to the severe offset of the rim to the hub. Stock spokes were 8 ga. with .300" diameter nipples.
Polished cast aluminum conical hub measures 9" on drive side and 4" on disc side. Rims must be drilled specifically to fit this hub due to the severe offset of the rim to the hub.
View Large Photo
View Large Photo
View Large Photo
